|
The overhead conveyor track is specially rolled I-beam section
produced from C-1045 steel to the following specifications:
- .43 - .50 carbon
- .6 - .9 manganese
The specially rolled I-beam conveyor track is available in
3-inch, 4-inch, and 6-inch track size. The conveyor track is stocked
in 20 ft. lengths and can be cut to any required length.
Due to high carbon content, our conveyor track assures longer
wear life and better resistance against track flange peening than
standard structural I-beam sections. Also, to assure a uniform cross
section of the track, the track is rolled under controlled
conditions. Standard mill tolerances, often the cause of misaligned
joints and out of square and out of parallel conditions are
eliminated.
|
